In accordance to Safety regulations in North America, both USA and Canada, it is mandatory for equipment to be approved. Especially in USA, safety regulations applicable in accordance to “29 CFR 1910”. For example, if an industrial tool/machine/equipment is not “listed” by one of the agencies recognized by OSHA then tool/machine/equipment must be “field labeled” as described below. Also, we can review and comment on early designs prior to the actual build cycle saving both time and cost for end user. This enables shorter time for final inspection at end user site “affixing FE label”(labeling) on installed tool/machine/equipment.

“29CFR1910”

• Ensuring safe and healthy working conditions for employees
• Each employer shall provide safe and healthy employment and place of employment in accordance to occupational safety and health standards.
• Workplace related products and equipment must be approved by an Accredited Inspection Bodies that is recognized by the regulatory authority having jurisdiction or Nationally Recognized Testing Laboratory (NRTL), which are qualified third-parties that met the requirements of the OSHA regulations. Several organizations have been recognized as NRTL in USA and Canada.

Product Certification (Listing) by NRTL (USA DoL OSHA/Canada ESA Accredited Inspection Bodies) for North American market

Safe Techno will work in partnership with you to resolve technical issues and we will support you from the beginning to the end, so please be assured.
We will help register your products to ANSI-UL product standard certification in North America. Also, we will work very closely with you to obtain a NRTL certification (label) and certificate of approval/conformance/compliance.

Limited/Lot Product Certification by NRTL(USA DoL OSHA/Canada ESA Accredited Inspection Bodies) for North American market

Initial lot production will be tested like product certification in the NRTL Certified laboratory. This is a comprehensive service if a NRTL certificate of compliance exits for initial lot product, then with minimum verification tests conducted at your factory/laboratory, may qualify to obtain product certification for next lot product, even if there is a minor deviation/design change.
Safe Techno will work in partnership with you to solve technical issues and we will support you from the beginning to the end , so please be assured.

Field Evaluation (Field Labeling) by NRTL(USA DoL OSHA/Canada ESA Accredited Inspection Bodies) for North American market

Authorities Having Jurisdiction (AHJ) across the United States and Canada, Almost all electrical products are required to qualify some sort of independent/third-party laboratory testing or field evaluation completed in-situ before the equipment or components to be energized.
Field Evaluation is a kind of traditional evaluation system in accordance to NEC NFPA/CEC CSA SPE-1000 electrical code. SAFE TECHNO conducts pre-evaluation for the product at manufacturer’s facility, and permitted to affix a pre-evaluation label to the product. After shipping and installation at customers site, our partner NRTL company, which is a nationally accredited independent third-party, affix applicable final FE label which is approved by AHJ that the product conforms to applicable standards.

SAFE TECHNO is one of the recognized Field evaluation firm in Oregon State.

USA Field Evaluation Label	Canada Special Inspection Label	USA Preliminary Evaluation Label
www.qps.ca

Safetechno Oregon Field Evaluation Label